Lexar THOR RGB 32GB (2 x 16GB) DDR5 6000MT/s CL38 UDIMM RAM – LD5U16G60C38BG-RGD

Product Overview

The Lexar THOR RGB DDR5 Desktop Memory kit, exact MPN LD5U16G60C38BG-RGD, provides 32GB total capacity as two matched 16GB 288-pin UDIMMs. This black kit is rated for 6000MT/s with CL38-48-48-96 timings at 1.35V. It supports Intel XMP 3.0 and AMD EXPO profiles, allowing compatible platforms to apply the rated profile through firmware settings. Integrated RGB lighting adds configurable illumination, while a solid aluminium heat spreader helps manage module heat. Lexar also specifies DDR5 on-die error correction, an onboard PMIC, a 0°C to 85°C operating-temperature range and a lifetime limited warranty. It is intended for desktop systems that use DDR5 UDIMM slots. The retail identity is the 32GB factory kit, so both included 16GB modules should remain together rather than being treated as separate products.

Key Features

• Factory 32GB kit containing two matched 16GB desktop modules.
• Rated 6000MT/s profile with CL38-48-48-96 primary timings.
• Intel XMP 3.0 and AMD EXPO profile support.
• Customisable RGB lighting for compatible desktop builds.
• Black aluminium heat spreaders support module heat dissipation.
• DDR5 on-die error correction and onboard power management.
• Covered by Lexar's lifetime limited manufacturer warranty.

Technical Specifications

• Brand: Lexar
• Series: THOR RGB DDR5 Desktop Memory
• Manufacturer Part Number: LD5U16G60C38BG-RGD
• Memory Type: DDR5
• Total Capacity: 32GB
• Kit Configuration: 2 x 16GB
• Capacity per Module: 16GB
• Interface / Form Factor: 288-pin UDIMM
• Rated Data Rate: 6000MT/s
• CAS Latency: CL38
• Primary Timings: 38-48-48-96
• Voltage: 1.35V
• Profiles: Intel XMP 3.0 and AMD EXPO
• Lighting / Colour: RGB / Black
• Manufacturer Warranty: Lifetime limited warranty

Compatibility and Setup

This is 288-pin DDR5 UDIMM desktop memory; it is not a DDR4 module and is not designed for laptop SODIMM slots. Check the motherboard manual and memory support list before installation. Reaching 6000MT/s requires a compatible CPU, motherboard, BIOS and memory controller, plus the appropriate XMP or EXPO profile. Supported speed can vary with platform limits, BIOS settings and the number of installed modules. Avoid mixing this factory kit with unmatched memory.

Frequently Asked Questions

Is this one 32GB module?
No. It is one factory kit containing two 16GB modules for 32GB total capacity.

Is it desktop or laptop RAM?
It is 288-pin DDR5 UDIMM memory for compatible desktop motherboards, not laptop SODIMM memory.

Does it support both Intel and AMD profiles?
Yes. Lexar lists Intel XMP 3.0 and AMD EXPO support for this THOR RGB family.

Is this registered server ECC memory?
Lexar specifies DDR5 on-die error correction. That component-level feature should not be treated as registered server-memory compatibility.

Will every system run it at 6000MT/s?
No. The attainable profile depends on the processor, motherboard, BIOS, memory controller and module population.